Monday, January 12, 2015

Wet Carpet: What Are The Steps You Should Take?

If you have water anywhere in your home and you have carpet, you can very quickly have a nasty problem on your hands – the carpet will help retain the moisture and you’ll be looking at mold and gross smells before too long. While the smell might SEEM like the worst part, the mold and damage to walls and the flooring will cause the really big problems.

So, you have two options – call in the pros or try to do it yourself. Mostly this is a judgement call. If you feel that it’s a small patch or is under control, then you might try it yourself. However, if you don’t know what to do, calling in carpet techs might be the right step for you:

http://zerorezindianapolis.com/blog/2014/12/03/wet-carpet-what-to-expect-after-a-professional-cleaning/Water is necessary to get truly clean carpet and remove carpet stains, but no one should have wet carpet for long after a professional cleaning. In fact, wet carpet can be more than an inconvenience. It can damage your carpet and harbor mildew growth.

There are four primary factors that affect dry times:

The homeowner and carpet cleaner typically have little control over these four factors. But over-wetting the carpet and lack of dry stroking are the most common reasons for long dry times, which are both caused by the technician. No matter the conditions of the job, dry time is the technician’s responsibility.

The industry standard for dry time is 4 to 8 hours and never longer than 24 hours. If your carpet is still wet 10 hours after a cleaning, consider switching service providers. And always look for companies that use professional grade fans to speed up dry times.

Hot water extraction, also known as “steam cleaning,” is a popular technique for cleaning carpets that involves applying a pre-spray to the carpet, agitating it and then extracting/rinsing through a wand using hot water.

Most services using hot water extraction rely on soaps, detergents and shampoos as cleaning agents. In order to remove these substances, the technician often over-wets the carpet to rinse out the chemicals. Because ZEROREZ uses Empowered Water as its cleaning agent, any possible need for adding extra water for rinsing is eliminated. Wet Carpet: What Are The Steps You Should Take?

DIY Carpet Drying

If the above sounds like too much, you may want to give it a shot yourself. This can be done in cases where there hasn’t been a large water leak or continuing water problems.

In the event that you are going to take on the project yourself, read through these good tips we found for dealing with moist carpets on your own:

http://carpetcleaningmachinesreviews.com/dealing-with-wet-carpets-and-the-threat-of-molding.htmlMultiple drying methods are required for carpet cleaning a large room or for an entire section of a room. An absorbent towel can be used to quickly dry smaller areas that are drenched by spilled water.

Use towels to soak up excess water. Open the towels thoroughly before laying them around the wet sections of the carpeting. Absorb the water by pressing the towels with your feet or hands. Towels should be replaced as they become drenched with water. Keep a bucket nearby to prevent dripping water on other areas of the room as you store towels or wring the water out.

Plug in the wet-dry vacuum instead of a traditional vacuum using your dry hands. Use the wet vacuum to draw the water out of the wet carpeting. Move it over the damp carpeting repeatedly in slow, straight lines. The vacuum’s canister can be emptied if needed.

To provide a cross breeze, open the windows throughout the floor and in the room with damp carpeting. If there’s humid air outside and there’s a window air conditioner in a room, keep the windows closed. A central air can be used if there’s no window air conditioner.

Plug in fans before placing them on dry areas of the floor or in the doorway of the room in the direction of the wet carpet. To suck in the moisture from the room, plug in the humidifier. The humidifier’s water-collection canister can be emptied if needed.

Sprinkle baking soda over the carpeting and let it sit for 30 minutes to allow any absorption of remaining odors and liquids. Remove the baking soda by vacuuming the carpeting. You may need to sweep off the solid pieces first, so that the vacuum cleaner will not become jammed.

Let the humidifier and fans run overnight. To avoid getting electrical shock, keep the humidifier and fan off the wet carpeting while plugged in. Inspect the carpeting on the following day for any signs of dampness. Pressing paper towels against the carpeting can be done to see if any dampness remains. Once you have determined that the carpeting is dry, return the furniture to the room. Dealing With Wet Carpets And The Threat Of Molding

The post Wet Carpet: What Are The Steps You Should Take? appeared first on Origin Water Professionals.

Monday, December 22, 2014

Water In Your Basement – What To Do?

If you have water in your basement, it could be from any number of problems:

  • cracked or leaking foundation
  • cracked walls
  • burst pipe in another area of the home or building
  • Failed sump pump

This is just a few areas that can cause issues – the real first step is finding out what the source is. If you have continuous water coming in from a burst pipe, the first step to take is to turn off water to your home to stop adding water to the problem.

Once you have identified the source, you can begin to take steps to stop further damage from happening.

The first step is to get remaining water out as this is the source of building water and mold damage:

If your basement is flooded with water from the storm, the first order of business is drying it out. If you already have a sump pump installed, it should start working as soon as electricity is restored, says Doug Lynch, owner of A-1 Basement Solutions in Scotch Plains, N.J.

Don’t go in the basement if it floods and you have power, says the New York State Electric and Gas Company, because energized outlets and wiring below the flood water pose an electrocution hazard. Make sure your energy company has turned off power to your house before you enter a flooded basement.

MacDonald says to use common sense if running the sump pump from a basement outlet, and make sure the outlet is completely dry. “If the outlets are in water or were soaking in water, you’re not going to use them,” he says.

If you have a larger amount of water, in the several-feet range, you’ll need to call a professional company, says MacDonald. They’ll have the equipment to get it done quickly and safely.

After the flood water is pumped out, Lynch recommends opening the basement windows to increase air circulation and decrease the possibility of mold. “Put all the ventilation possible into the basement to dry it out before mold spreads.” Cleaning Up After A Basement Flood | Bankrate.com

Hopefully your home or business doesn’t become totally flooded and you are able to remove the small amount of water before it causes large damages. However, in the event of a flooding river or extreme foundation issues, you may have a larger task ahead of you.

A Tough Tale Of A Flooded Home

Water, Water Everywhere

http://www.thisoldhouse.com/toh/article/0,,20201871,00.html“Instantly, water filled the basement faster than I could keep up.” Just before the water reached the waist-high electrical outlets, Fink decided to evacuate.

“We wanted to get rid of the stuff as quickly as possible, because mold spores appear in 24 to 48 hours after a flood,” he says.

Seven men shoveled out the sludge, kicked out the lightweight wooden partition walls in the basement, and carried out the losses: a washing machine, dryer, freezer, furnace, and electrical box, along with furniture and memorabilia.

“Unfortunately, when floods come from water that’s been outside, the water is contaminated and it’s hard to save any walls, carpets, or contents,” says DiPrima.Job done?

Only if Fink wanted a house full of bacteria and mold.

When we spoke to him a few months after the flood, he was replacing his basement windows and fixing the back entryway by himself, because his insurance didn’t include labor costs.

 
The Bill:

Flood Cleanup Floor and wall sanitation (at $1.25 per square foot): $1,920

Trash removal: $500

Dehumidifiers and fans : $1,230

Fogger treatments: $950

Total: $4,600

 

Follow-up Work

Duct cleaning: $225

Additional cleanup (dehumidifier, wet vacuum): $275

Equipment refurbishment and replacement: $10,865

Total: $11,365

Grand total: $15,965 Water, Water Everywhere | Basements & Foundations | This Old House

The numbers can be scary in a situation like this, but keep in mind that if you delay in this type of situation you can multiply the amount of damages and the time and cost to fix them. If you’re unsure of the best steps, or just need help with water damages, contact us today – Origin Water Pros services all areas of the US: http://originwaterpros.com/service-locations/

The post Water In Your Basement – What To Do? appeared first on Origin Water Professionals.

Monday, December 15, 2014

Mold On Wood And What To Do About It

If you have water and construction materials in contact, you’re eventually going to have a problem. However, there are differences in issues that can crop up.

For instance, when building a new home, if exposed to rainfall and other moisture sources, lumber will naturally show some signs of mildew, which is normal. So long as it is cleaned off and not covered up while wet, nothing bad will come of it.

However, if you have wet lumber or drywall in a built home or building (think flooded basement) you need to take some additional steps since it is much more likely that there is areas that are not being dried or that are wet and covered up.

Wet Wood – What To Do?

First off, how does this happen? The University of Tennessee has this to say about it:

Molds produce millions of microscopic spores that can be carried in the air. If these spores land on the surface of wood (or other materials), and conditions are right, then a new growth of mold will result. Mold spores are all around us and in the air that we breathe. High concentrations of mold spores may cause allergic reactions in sensitive individuals.

The best way to prevent or stop mold from growing on wood is to keep the surface of the wood dry. This means that bathrooms, kitchens and basements should be well ventilated. Existing mold can be removed by washing with water, and bleach or detergents can be used to eliminate discolorations. Unfortunately, if the conditions for mold growth remain, new spores will land on the wood and fresh mold will grow. Mold on Wood

So, like we were saying, it’s not always a reason to be alarmed, but it needs to be dealt with quickly. Ignoring the problem means that it is much more likely that mold will regrow and cause problems. Not only can it pose a health risk, but it can also weaken lumber and other building materials.

As far as covering up materials that are not dry – it’s just something you don’t want to do. Additionally, when working with a house that has experienced a water problem like a flooded basement or backed up pipe, you need to make sure you expose all areas to air flow to allow them to completely dry:

Mold and mildew usually not a threat to lumber – unless you cover it

http://articles.chicagotribune.com/2012-08-17/classified/sns-201208061930--tms--askbildrctnab-a20120817-20120817_1_mildew-lumber-wood-rotYou do not want to cover up this contaminated wood. It needs to be cleaned before any insulation is installed. Never cover this stained wood with drywall or paneling. Anyone with asthma or other respiratory challenges could suffer from the hidden spores.

It doesn’t take long for wood to air dry, especially once the roof is on and there are high-performance vapor barriers in place in crawlspaces and under concrete slabs. Don’t be fooled by a builder that says the wood will dry out on it’s own in the wall. With vapor barriers in place on walls, and sometimes ceilings, it’s very hard to get wood to dry out. Mold and mildew usually not a threat to lumber — unless you cover it before it’s dry – Chicago Tribune

Do you have any water or mold damage issues? If so, contact us today for assistance. Origin Water Pros services all areas of the United States: http://originwaterpros.com/service-locations/

The post Mold On Wood And What To Do About It appeared first on Origin Water Professionals.

Friday, December 12, 2014

Mold – Is It A Real Health Concern Or Not?

Nearly everyone has heard of horror stories with mold in homes or a business, but a lot of people still aren’t sure if mold can be a serious issue. Some folks think that it’s been blown out of proportion or that the stories have been made to sound worse than it actually was.

We’ve collected some authoritative sources to help you decide once and for all if mold is a real health concern or not. First off, here’s what the EPA has to say:

A Brief Guide to Mold, Moisture, and Your Home | Mold and Moisture | US Environmental Protection Agency

http://www.epa.gov/mold/moldguide.htmlMolds are usually not a problem indoors, unless mold spores land on a wet or damp spot and begin growing. Molds have the potential to cause health problems. Molds produce allergens (substances that can cause allergic reactions), irritants, and in some cases, potentially toxic substances (mycotoxins). Inhaling or touching mold or mold spores may cause allergic reactions in sensitive individuals. Allergic responses include hay fever-type symptoms, such as sneezing, runny nose, red eyes, and skin rash (dermatitis). Allergic reactions to mold are common. They can be immediate or delayed. Molds can also cause asthma attacks in people with asthma who are allergic to mold. In addition, mold exposure can irritate the eyes, skin, nose, throat, and lungs of both mold-allergic and non-allergic people. Symptoms other than the allergic and irritant types are not commonly reported as a result of inhaling mold. Research on mold and health effects is ongoing.

Molds gradually destroy the things they grow on. You can prevent damage to your home and furnishings, save money, and avoid potential health problems by controlling moisture and eliminating mold growth A Brief Guide to Mold, Moisture, and Your Home | Mold and Moisture | US Environmental Protection Agency

So, for most people mold in confined spaces can cause actual problems – and make existing medical issues worse.

Additionally, it will really wreak havoc with materials that it comes into contact with – literally destroying anything that it grows on!

CDC – Mold – General Information – Basic Facts

http://www.cdc.gov/mold/faqs.htm#affectSome people are sensitive to molds. For these people, exposure to molds can cause symptoms such as nasal stuffiness, eye irritation, wheezing, or skin irritation. Some people, such as those with serious allergies to molds, may have more severe reactions. Severe reactions may occur among workers exposed to large amounts of molds in occupational settings, such as farmers working around moldy hay. Severe reactions may include fever and shortness of breath. Some people with chronic lung illnesses, such as obstructive lung disease, may develop mold infections in their lungs.

In 2004 the Institute of Medicine (IOM) found there was sufficient evidence to link indoor exposure to mold with upper respiratory tract symptoms, cough, and wheeze in otherwise healthy people; with asthma symptoms in people with asthma; and with hypersensitivity pneumonitis in individuals susceptible to that immune-mediated condition. The IOM also found limited or suggestive evidence linking indoor mold exposure and respiratory illness in otherwise healthy children. CDC – Mold – General Information – Basic Facts

The CDC goes into further detail above about the specifics of dangers from various molds – that can occur both inside the home and outdoors. If you also would like CDC  recommendations on how to minimize the risk from these molds you can read more at the link provided.

So, what is the answer? Molds can cause health problems and can really make existing issues worse. Please contact water and mold damage experts if you think you have mold problems and get it taken care of ASAP!

The post Mold – Is It A Real Health Concern Or Not? appeared first on Origin Water Professionals.

Saturday, December 6, 2014

How To Remove Drywall The Right Way

If your home or business has experienced some damage from water then it’s highly likely that you’ll need to get rid of some drywall or sheetrock. This can be a DIY project if you know what you’re doing, and a little preperation ahead of time will really come in handy. finishing drywall joining after water damage repair

In addition to saving money, by acting quickly and getting rid of wet drywall you can help prevent issues with mold: http://originwaterpros.com/faq/moisture-damage/

If you aren’t sure about the next step in your work or aren’t sure how to do this work safely, contact a water damage remediation professional.

Removing Damaged Drywall

So, follow this information to get damaged drywall out of your home and prevent mold growth before it starts.

Hang plastic sheeting to seal off the rest of the room or house. Attach the sheeting with duct tape. Close any cabinet door. Turn off the air conditioner or any circulating fans to keep dust and debris from circulating throughout the house. Close the air vents to the room. Close any windows.

Remove Trim and Begin to Remove Drywall

Wearing a face mask or air respirator to protect from dust, use the pry bar to remove all of the trim from the wall, including the baseboard, crown molding, any chair rails and any molding or trim from around doors or windows where the drywall is located.

Use a small pry bar to remove the trim. Begin at the edge of the wall or where the trim has been removed. Place the pry bar above a nail and pull the drywall toward you. Move the pry bar to below the nail and pull the drywall towards you. Repeat at each nail section on the same edge. Once the drywall is loosened, pry the nails out. Most pry bars have a slot for pulling nails. If your pry bar doesn’t have this slot, use the claw section of a hammer. Remove as many nails from the drywall as possible.

Remove Large Sections

Using a hammer, tap on the back side of the drywall. This will loosen the drywall but not break it into small pieces. Remove the large sections of drywall and set them aside. With the larger pieces of drywall removed, begin to remove the smaller pieces of drywall that are located closer to the nails.

Remove Drywall Approaching from Back

If you cannot reach the back side of the drywall, use a hammer to make a small hole into the drywall. Make a hole near the edge of the drywall but away from the nails. Insert your hand and hammer into the back of the drywall. Tap on the back side of the drywall to remove it.

Remove Remaining Nails and Clean Up

Remove all remaining nails located on the wall studs. Use the slotted end of the pry bar or the claw end of a hammer.

Place the nails in a covered jar and set aside all of the drywall in an area outside to reduce dust and debris. Use a shop vac to clean up any dust from around where you removed the drywall. Clean up the area completely and remove the plastic sheeting and duct tape. http://www.doityourself.com/stry/how-to-remove-drywall-safely-and-efficiently

Getting rid of drywall on your own can be an effective second step in moisture damage situations. The first step is to always stop the source of the water so that it doesn’t continue to damage your property. Next, getting your flooring sorted out is important since it will likely hold the most water – and then the drywall.

The post How To Remove Drywall The Right Way appeared first on Origin Water Professionals.

Tuesday, November 25, 2014

Water In Your Walls? Read This

Water can get just about anywhere. It flows, it seeps, it absorbs and moves on. We’re all familiar with pictures of wet or flooded floors and basements but how about water in your walls?

How does water get in walls?

There are several mechanisms that can result in water getting into or on your walls. We’ll outline awater damage at a floor wall interface few of them here:

  • Water seeping down from the ceiling. Let’s say you’ve had a leak between floors or a burst pipe. The water has to go somewhere and gravity will help propel it downwards through the ceiling tiles or walls – whatever is closest.
  • Water being absorbed from the floor. This is how water damage on the floors gets spread to the walls. The dry material (drywall, lumber, etc) used in the walls will greedily suck up the moisture from the saturated carpets and flooring. Now you have damage to your walls and surrounding areas.
  • A leak IN the wall. Many areas of the home and office structures have pipes running between the walls. It’s how we keep our buildings looking neat and orderly! However, that can be a real problem when you suddenly see water pool along a wall or dripping down it!

What can you do to help a wet all?

There are several things that you can do to help remediate a wall that has moisture problems. These tips are a pretty good start:

Natural ventilation is one alternative for drying out a wall. It is definitely the least expensive, assuming you don’t run into problems. However this method is time consuming and mold is a fast growing organism that can spread while you wait for the walls to dry. If you do choose to dry the walls naturally, follow these steps:

  1. Turn off the water source immediately.

  2. Remove wall hangings and paintings. If the walls are papered, you will most likely need to remove the paper and repaper when the walls are dry.

  3. Check any wall or ceiling insulation. Start removing and drying the insulation from the ceiling down to the floor. You may need to dispose of insulation if it is soaked.

  4. Remove molding and baseboards. To properly dry out a wall, you need to remove any molding at the top of the wall and baseboards at the floor. Otherwise, the walls won’t have proper ventilation and moisture can remain trapped behind the baseboard and molding.

  5. Get plenty of ventilation. Open windows and doors and blow fans on the wet area until the walls are dry. Just be careful about plugging in electrical appliances near water. Also run the air conditioner in the summer. http://homeimprovement.lovetoknow.com/How_to_Dry_Out_Wall_After_Water_Damage

Do you need help with your home or business and water problems? Contact us today: http://originwaterpros.com/service-quote/

The post Water In Your Walls? Read This appeared first on Origin Water Professionals.

Saturday, November 22, 2014

How to Keep Wet Carpet From Molding

Once water has made it into your home and gotten your floors and carpet wet you need to deal with it quickly. You don’t have time to sit around and figure out what to do – if you act quickly you can potentially save a lot of time and money.

The steps that you need to take go in order of most water removal to least. Obviously, you start with removing large amounts of water through towels and buckets and move down to dehumidifying and air drying.

If done correctly, and quickly, you may be able to salvage your carpeting and stop the room or area from growing mold:

http://homeguides.sfgate.com/keep-wet-carpet-molding-27621.htmlHow to Keep Wet Carpet From Molding | Home Guides | SF Gate Wet carpet can be a perfect breeding ground for mold, especially if the air is humid and the water remains in place longer than 48 hours. It’s important to act quickly in removing moisture from the carpet fibers. Smaller areas drenched by a dropped cup of water can be dried quickly with an absorbent towel, but large or entire sections of a room require multiple drying methods. Removing as much water as possible on the first day of the incident will reduce the chances that mold spores will grow.

Soak up excess water with towels. Open the towels completely, and lay them around the wet sections of the carpeting. Press down with your hands or feet to absorb the water. Replace the towels as they become saturated with water. Keep a bucket nearby to store the towels or to wring the water out so you don’t drip water around other areas of the room.

Make sure your hands are dry and plug in the wet-dry vacuum. Set it to “Dry,” and move it around the wet carpeting. Go over the damp carpeting multiple times in slow, straight lines. Empty the vacuum’s canister as needed.

Open windows throughout the floor and in the room with the wet carpeting to provide a cross breeze. If the air outside is humid, keep the windows closed and run a window air conditioner, if one is in the room, or turn on the central air to reduce the humidity.

Open windows throughout the floor and in the room with the wet carpeting to provide a cross breeze. If the air outside is humid, keep the windows closed and run a window air conditioner, if one is in the room, or turn on the central air to reduce the humidity.

Plug in fans and position them in the doorway of the room or on dry areas of the floor in the direction of the wet carpet. Plug in a dehumidifier to suck in the moisture from the room. Empty the dehumidifier’s water-collection canister as needed.

The post How to Keep Wet Carpet From Molding appeared first on Origin Water Professionals.



from Origin Water Professionals http://feedproxy.google.com/~r/OriginWaterProfessionals/~3/HbaIGJ_UPXo/